Search
Forum Home | Login
kimballrudeen
Join Date 11/2016
0

Fences keep moving to primary Windows 10 display

April 3, 2019 12:39:42 PM from Stardock ForumsStardock Forums

I have four displays set up in Windows 10.  Two are on VGA, and two are through USB connections.  I have an extensive set of fences on the two USB displays.

Frequently when I boot up my computer, all of the fences wind up on the Windows 10 primary display (on VGA) instead of the displays I created them on. 

Restoring a snapshot has no effect.  The same fences are still on the primary display.

I have to manually move the fences back to their correct positions on the intended displays.

I am running Fences 3.0.9.11.

On Layout features and snapshots, I have the following items set:

-"Story my Fences' positions on a per-screen-resolution basis."

-"When I plug in a new primary monitor, move my icons to it." 

Could either of these be the problem?

Any suggestions?  Should I try moving the fences to the VGA displays just in case?

Thanks in advance for any suggestions.

 

Search this post
Advanced Search
Subscription Options
Reason for Karma (Optional)
Successfully updated karma reason!
AzDude
Join Date 11/2002
+237
Reply #1 April 3, 2019 12:52:50 PM
from WinCustomize ForumsWinCustomize Forums

Hello,

I have forwarded your report to the Stardock support team for their review and recommendations.

Please keep an eye on this thread for any updates.

We really do appreciate your feedback, thanks.

AzDude
Stardock Community Assistant

Reason for Karma (Optional)
Successfully updated karma reason!
sdRohan
Join Date 10/2012
+125
Reply #2 April 3, 2019 1:00:10 PM
from WinCustomize ForumsWinCustomize Forums

Hello,

Sorry to hear you are having trouble.

Two are on VGA, and two are through USB connections. 

Almost everytime we read such a report it is rooted in people using USB connected monitors - we don't know why but it has some effect on how any primary monitor is seen, by Windows, using that connection type. 

----------------
Sean Drohan
Stardock Customer Service Manager

Reason for Karma (Optional)
Successfully updated karma reason!
Mist_Dragon
Join Date 06/2007
+2
Reply #3 April 23, 2019 7:24:10 PM
from Stardock ForumsStardock Forums

Actually I have 4 monitors and all are display port, I like to have all my icons on the top left monitor which is not the primary monitor.  I installed a new graphics driver and it moved everything to the primary monitor...including all the fences.   So I went to restore the snapshot, which nicely arranged them on the primary monitor.

The top monitors are 1440p resolution and the bottom ones are 4k, so there is a resolution difference, and moving them from the 4k to the 1440p monitors changed the size of the fences as well to be a lot bigger (most likely the resolution increase on the 4k monitors).

Just would like the snapshot restore to put them back where they were prior to things like a driver update.

+1
Reason for Karma (Optional)
Successfully updated karma reason!
Aquavano
Join Date 04/2019
0
Reply #4 April 29, 2019 1:30:53 PM
from Stardock ForumsStardock Forums

I have similar problem.  2 monitors - both 4k.  Nvidia. Windows 10.

awake from sleep or reboot swaps my fences to the opposite screen.

 

Restore snapshot only works sometimes ... usually not. VERY frustrating.

Reason for Karma (Optional)
Successfully updated karma reason!
Hellosatan
Join Date 12/2008
0
Reply #5 April 30, 2019 12:23:34 AM
from Stardock ForumsStardock Forums

Same issue. Dual monitors both using DP. Nvidia. Windows 10. One 4k and one 1080. Happens almost every boot. Restoring snapshot doesn't always work.

Also happens if I lock computer, turn screens off while in use (not unplugging), or computer goes into power save. 

Emailed support (#FFT-776-47999) and their response was "If you look at the forums you will see how activate they are... If you post in the forums, you will be helped." Well, I'm here looking in the forums almost two months later because I can't put up with this anymore. This still seems to be an unresolved issue and the only response from Stardock is "I have forwarded your report to the Stardock support team for their review and recommendations." or blaming it on a USB connection most of the reports here aren't using?! Will someone just please answer/fix this?   

Reason for Karma (Optional)
Successfully updated karma reason!
basj
Join Date 03/2001
+233
Reply #6 April 30, 2019 1:03:55 AM
from Stardock ForumsStardock Forums

Hello,

Sorry to hear you are having issues. But I been using Fences on my 2 monitors. Never I have my fences move around as mentioned here. I wonder what is the setting on your system for the Fences Layout (Marked in red). I was using two monitor both 1920x1200 before. And last week I get my new 4K monitor and replace one of my 1920x1200. But upon reboot all my fences still there. Obviously, I need to do some minor Fences moving if change the scaling from 100% to 150%. But once its set. The location stick everytime I reboot. Now, I have saved layout for my 100%, 125% and 150% just incase work require me to change my scaling. All tested and its working for me.

Basj,

Stardock Community Assistant.

Reason for Karma (Optional)
Successfully updated karma reason!
Mist_Dragon
Join Date 06/2007
+2
Reply #7 April 30, 2019 9:31:33 AM
from Stardock ForumsStardock Forums

well one issue for me is that I have all the icons on a monitor that is NOT the primary, so setting that checkbox would for sure move them more than they do now.  They generally stay put, but a driver update at some point I think has disabled all but 1 monitor and that causes them to move.  This isn't something I blame fences for, it was when I said restore the snapshot that it didn't put them back on the non primary monitor.

So, it's annoying when it happens, but not a daily thing.  I'm also not the average user having 4 monitors along with 2 at one resolution and 2 at another.

Reason for Karma (Optional)
Successfully updated karma reason!
sdRohan
Join Date 10/2012
+125
Reply #8 April 30, 2019 9:39:27 AM
from Stardock ForumsStardock Forums

Quoting Lord Darkstorm,
reply 7

I'm also not the average user having 4 monitors along with 2 at one resolution and 2 at another.

Any of them USB connected?

----------------
Sean Drohan
Stardock Customer Service Manager

Reason for Karma (Optional)
Successfully updated karma reason!
Mist_Dragon
Join Date 06/2007
+2
Reply #9 April 30, 2019 11:54:09 AM
from Stardock ForumsStardock Forums

no...I haven't used a usb monitor in....5 plus years...all display port.

 

Reason for Karma (Optional)
Successfully updated karma reason!
eldorel
Join Date 09/2015
0
Reply #10 May 16, 2019 10:40:44 PM
from Stardock ForumsStardock Forums

Not sure if this might help, but I have noticed a pattern in my case. 

To be clear, i've been seeing the same problem for a disturbingly long time on multiple systems. 
It's been happening since I installed windows 8.1 and upgraded to fences V2, so I just eventually setup my systems to not turn the displays off unless required. 

For reference, this is on a laptop (using a displayport dock for two screens and displayport direct from the gpu output for the primary), my work desktop (2x hdmi, 1x diplayport, 1x dvi), and my personal desktop (1x hdmi, 1x displayport, 1x DVI). 

The only common factor on all of these systems is that they all have multiple GPUs driving separate displays without using SLI. (intel+nvidia, nvidia+nvidia, Nvidia+nvidia+amd)... 


Reason for Karma (Optional)
Successfully updated karma reason!
Manucaillaud
Join Date 07/2018
0
Reply #11 May 20, 2019 10:02:39 AM
from Stardock ForumsStardock Forums

Dear all, 

I have the same problem and that's why I save the configuration but it never succeed to apply it after. All fences remain on the "bad" screen. 

Thanks for your help

Emmanuel

Reason for Karma (Optional)
Successfully updated karma reason!
View all recent posts
Mark all posts as read Delete cookies created by the forum Return to Top
Stardock Forums v1.0.0.0   #108492   web02  Server Load Time: 00:00:00.0000125  Page Render Time:
Facebook Twitter YouTube Google+